Philips IntelliVue MX40 Features
The Philips IntelliVue MX40 is a wearable patient monitor. It’s designed to support ambulatory patients for continuous ECG and optionally, SpO2, and impedance respiration. The short-range radio options allow connection to the IntelliVue Cableless Measurements or an IntelliVue patient monitor for additional parameters. The display on the IntelliVue MX40 provides immediate access to patient information at the point of care. The 6-lead and two V-leads can be used for diagnosing multiple cardiac abnormalities, including wide-QRS complex tachycardias and acute myocardial ischemia/infarction.
- Easy for clinicians to use and comfortable for patients to wear.
- 2.8” color, touchscreen display.
- Smart, multi-measurement cable system available for use with reusable and single-patient-use supplies.
- FAST SpO2 (Continuous, automatic, or manual measurement)
- Standard, EASI, or Hexad ECG lead system selection.
- Communication with IntelliVue Patient Monitors and Cableless Measurements via a short-range radio connection.
- Powered by three AA batteries or rechargeable lithium-ion battery pack.
Philips IntelliVue MX40 Specifications
Dimensions
- Height: 4.99” (12.7 cm)
- Width: 2.75” (7 cm)
- Depth: 1.24” (3.2 cm)
- Weight (Without Batteries): 8.5 oz (240 g)
Battery
- Lithium-ion battery pack or 3 AA batteries
- Charge Time: 6.5 Hours (Lithium-ion battery)
Display
- Type: 2.8” QVGA Color LCD
- View Area: 1.7” x 2.3” (4.3 cm x 5.8cm)
- Resolution: 240 x 320
- Backlit: White LED
Environmental
- Temperature
- Operating: 23 to 99°F ( 0 to 37°C)
- Storage: -22 to 122°F (-30 to 35°C) without batteries
- Humidity
- Operating: < 95% RH at 98.6°F (37°C)
- Storage: < 90% RH at 122°F (50°C)
- Altitude
- Operating & Non-operating: 9,842 ft (3,000 m)
- Barometric Pressure: 537 mmHg (72 kPa)
ECG
- Lead Wires: 3, 5 or 6-wire patient cable compatible with IntelliVue Patient Monitor, AAMI/IEC color codes
- Resolution: 5μV
- ECG Input: Differential, defibrillator protected against 360 joules discharge into a 100 ohm load
- Input Impedance: > 5 meohms (@ 10 Hz
- Input Dynamic Range: +/- 9 mV
- DC Offset Range: +/- 320 mV
- CMRR: ≥ 90 dB @ 50, 60 Hz
FAST SpO2
- Lead Wires: 3, 5 or 6-wire patient cable compatible with IntelliVue Patient Monitor, AAMI/IEC color codes
- Resolution: 5μV
- ECG Input: Differential, defibrillator protected against 360 joules discharge into a 100 ohm load
- Input Impedance: > 5 meohms (@ 10 Hz
- Input Dynamic Range: +/- 9 mV
- DC Offset Range: +/- 320 mV
- CMRR: ≥ 90 dB @ 50, 60 Hz